Customized Display Elements “LCD-Case”
The case belongs to the display like the lid to the pan. But there are a few things to bear in mind when attaching it. A simple and cost-effective method of mounting is to stick the module into the enclosure using DST (Double Side Gluetape). Depending on the tightness requirements, however, the DST must be attached differently.
EDT UI2 Displays
IPS* panels are used in all versions. This technology ensures excellent readability from any viewing angle. In combination with the extended operating temperature range of -30°C to +80°C, the modules can be used in a variety of applications, whether handheld, medical or industrial.
What actually means “CTP | RTP”
The CTP (Capacitive Touch Panel) is more expensive compared to an RTP, but has a much longer service life. The structure consists of a two-layer coordinate network. The lower electrode (glass with ITO) is divided into columns and the upper electrode into rows.
Customized Display Elements “Touch”
Resistive and capacitive touch panels are almost always used in the LCD sector. Nowadays, however, the focus is on capacitive touch panels, because they have a longer service life and thus a big advantage over resistive ones. CTPs (capacitive touch panels) offer a choice of three different structures.
Finally it’s trade fair time again
After a long wait, the time has finally come again at the end of June. We can exhibit our display novelties at the embedded world in Nuremberg. And what's even [...]
Customized Display Elements «Interface»
An interface is the connection between the display and the control unit. The RGB and LVDS interfaces are used particularly often. A basic distinction is made between serial and parallel interfaces. The most commonly used are SPI, I2C, MCU, RGB, LVDS and MIPI-DSI. However, the SPI, I2C and MCU interfaces are mostly used for settings in the LCD controller and not for the playback of image content (except for character LCDs or small graphic displays with dimensions up to 320 x 240 mm).
Customized Display Elements «Coverlens»
The cover lens - also known as a cover glass or front glass - protects the display from scratches, dirt and UV radiation. The cover lens is bonded to the display. You can adjust many things with a cover lens. Most important are the size and thickness of the glass. But the hardness also plays a role, because no one likes to have scratches on the display.
Information on the current market situation
In the short term, no delivery delays are expected despite the current Russia/Ukraine conflict. However, there may be delivery delays in the medium term as a large part of important raw materials such as palladium and neon gas come from this area.
2.86″ Bartype TFT Display
Special format, high resolution, suitable for industrial use and even with touch! Is it all possible? Of course it does! At DMB Technics, we always want to offer our customers optimal solutions so that their design ideas can be put into practice. Often, however, the wishes and requirements for the display design and the standards available on the market seem to be difficult to reconcile. If several factors that deviate from the standard come together, implementation often seems difficult. This is where we, as display experts, come into play.
Customized Display Elements «Backlight»
The light that backlights the display is called backlight. Two points play a central role in ensuring that the lighting is optimal. The first and most important point is brightness. Since around 90 percent of the light is absorbed by LCDs, polarisation foils or other components, sufficiently bright LEDs are needed.
In challenging times you need a display expert
For some time now, the challenging market situation has kept us on our toes, showing us on a daily basis that the world does not stand still - no matter [...]
Transflective displays for e-mobility
The market for e-mobility displays has grown recently. The potential applications in this field require high demands on readability - the so-called sunlight readability of the displays - in different light conditions, such as direct sunlight.
What actually means “Full array Local Dimming”?
Most industrial TFTs today have an edge LED backlight. The backlight illuminates the entire surface of the TFT, so if we reduce the brightness of the backlight, it affects the entire TFT surface at the same time.
Smart Embedded Displays for HMI
Highly integrated, intelligent displays are in high demand these days. Most of the time, the modern HMI (Human Machine Interface) is complex and requires more processor resources than the control of the actual application. With a smart embedded display product, DMB Technics covers a large part of the requirements for current HMI and makes computing power available where it is needed.
Mitsubishi Replacement
Since last summer it has been known that Mitsubishi Electric will no longer produce TFT and LCD displays in its production facility in Japan from June 2022.
Raystar Micro TFT LCD
Small monochrome displays are already widely used in various applications. However, the representation of colors is also increasingly desired for such displays. For the representation of colors TFT displays are mostly used.
Smart Embedded Displays
Nowadays, highly integrated, intelligent displays are particularly in demand. Most of the time, the modern HMI (Human Machine Interface) is more complex and needs more processor resources than the control of the actual application.
What actually means “IPS”?
(In-Plane Switching) IPS technology works in a similar way to TN technology. The difference is that the LC crystals are arranged in parallel and twisted by 90 ° in the [...]
Using market change as an opportunity
Since last autumn, we have been dealing with rising prices and delivery times in the entire electronics market. This trend is also affecting the display industry and is continuing. One of the main causes is the worldwide strong increase in demand for consumer
What actually means “VA”?
A VA display (Vertical Aligement) consists of two linear polarizing filters rotated 90° to each other and some other stuff. Between the filters are two transparent electrodes (a pixel electrode and a common counter electrode). These usually consist of a glass plate with an ITO layer (indium tin oxide) applied. On top of this is the orientation layer. The elongated liquid crystals are embedded in between.